-
Steel Pipe Nipple
-
Water Tap And Bibcock
-
Steel Pipe Socket
-
Butt Welding Pipe Fittings
-
Stainless Steel Pipe Fittings
-
Steel Pipe And Tube
-
Steel Square Tube And Pipe
-
Flange
-
King Nipples
-
Hose Nipples
-
Pipe Clamp
-
Malleable Iron Pipe Fittings
-
Suction Filter Strainer
-
Brass Pipe Fitting
-
Camlock Fitting & Coupling
Aluminum acoplecs clamlock fitting quick coupling connection for pipe camlock couplings
| Material | ALUMINUM |
|---|
![]()
Introduction
Aluminum camlock couplings—also called cam and groove couplings or quick connect pipe fittings—are among the most widely used hose connection fittings in fire protection, petroleum transfer, chemical handling, and industrial fluid systems. They allow fast, tool-free connect and disconnect, which is why they appear everywhere from fire trucks to fuel tankers to factory floors.
But camlock couplings come in several distinct types, and choosing the wrong one wastes time, causes leaks, or creates a safety hazard. This guide explains Type A, B, C, D, E, F, and DP aluminum camlock couplings—what each one is, how it connects, and where it is used—so you can specify the right fitting for your application.
What Is a Camlock Coupling?
A camlock coupling is a quick-connect hose fitting consisting of a male adapter (grooved end) and a female coupler (with two cam levers). The male adapter inserts into the female coupler, and the cam levers lock it in place. A gasket inside the coupler provides the seal. No tools, no threading, no time wasted.
Aluminum is the most common material for camlock couplings because it is lightweight, corrosion-resistant in many environments, and cost-effective. It is suitable for water, many chemicals, and petroleum products—though not for every chemical, so always verify compatibility.
Key point: Camlock types are defined by their end connections. A Type A and a Type F may look similar but connect differently. Understanding the type letters is essential for correct ordering.
Camlock Coupling Types A, B, C, D, E, F, and DP Explained
Type A — Male Adapter × Female NPT/BSPT Thread
Type A has a male grooved end (inserts into a female coupler) and a female threaded end. It is used when you need to connect a camlock hose assembly to a male pipe thread—for example, a pump inlet or a tank connection with male threads.
-
Connects to: Type D, B, or C couplers (grooved end); male pipe thread (threaded end)
-
Typical use: Pump inlets, tank connections, manifold adapters
Type B — Female Coupler × Male NPT/BSPT Thread
Type B has a female coupler body (with cam levers) and a male threaded end. It connects a male pipe thread to a male camlock adapter (such as Type A, E, or F).
-
Connects to: Type A, E, or F adapters (coupler end); female pipe thread (threaded end)
-
Typical use: Connecting hose assemblies to pumps, valves, or equipment with female threads
Type C — Female Coupler × Male Hose Shank
Type C has a female coupler body and a male hose shank (barbed end for inserting into a hose and securing with a clamp). It is used to attach a camlock coupler directly to a hose.
-
Connects to: Type A, E, or F adapters (coupler end); hose (shank end)
-
Typical use: Hose assemblies where one end needs a quick-connect coupler
Type D — Female Coupler × Female NPT/BSPT Thread
Type D has a female coupler body and a female threaded end. It connects a male pipe thread to a male camlock adapter.
-
Connects to: Type A, E, or F adapters (coupler end); male pipe thread (threaded end)
-
Typical use: Connecting camlock adapters to male-threaded pipes, pumps, or tanks
Type E — Male Adapter × Male Hose Shank
Type E has a male grooved end and a male hose shank. It attaches a hose to a female camlock coupler.
-
Connects to: Type B, C, or D couplers (grooved end); hose (shank end)
-
Typical use: Hose assemblies requiring a male adapter for quick connection
Type F — Male Adapter × Male NPT/BSPT Thread
Type F has a male grooved end and a male threaded end. It connects a female camlock coupler to a female pipe thread.
-
Connects to: Type B, C, or D couplers (grooved end); female pipe thread (threaded end)
-
Typical use: Connecting hoses to pumps, tanks, or equipment with female threads; fire hose connections
Type DP — Dust Plug
Type DP is a dust plug that inserts into a female coupler to protect the interior from dust, dirt, and debris when the coupling is not in use. It has no threaded or hose connection—it is a protective cap.
-
Connects to: Any female coupler of the same size
-
Typical use: Protecting open couplers during storage or transport
Quick Reference Table
| Type | End 1 | End 2 | Common Use |
|---|---|---|---|
| A | Male adapter | Female thread | Pump inlet, tank connection |
| B | Female coupler | Male thread | Hose to equipment with female thread |
| C | Female coupler | Hose shank | Hose assembly with coupler |
| D | Female coupler | Female thread | Coupler to male pipe thread |
| E | Male adapter | Hose shank | Hose assembly with adapter |
| F | Male adapter | Male thread | Hose to equipment with female thread |
| DP | Dust plug | — | Protecting open couplers |
How to Choose the Right Camlock Type
Choosing the correct type comes down to two questions:
-
What are you connecting to on each end? A threaded pipe, a hose, or another camlock?
-
What gender is each connection? Male or female?
For example:
-
Connecting a hose to a pump with a female threaded inlet: use Type F (male adapter × male thread) with a Type D coupler, or Type B (female coupler × male thread) directly.
-
Connecting a hose to a tank with a male threaded outlet: use Type A (male adapter × female thread) or Type D (female coupler × female thread).
-
Building a hose assembly with a quick-connect on one end: use Type C or Type E (hose shank end).
Rule of thumb: Camlock connections always pair a male adapter with a female coupler. The thread and hose ends determine the type letter.
Material and Pressure Considerations
Aluminum camlock couplings are lightweight and suitable for many water, chemical, and petroleum applications. However, they are not compatible with all chemicals, and pressure ratings vary by size. Typical aluminum camlock working pressure ratings range from about 150 PSI at 1/2 inch up to 250 PSI for 3/4–2 inch sizes, decreasing for larger sizes.
For fire protection and high-pressure applications, always confirm the working pressure of the specific size and material against your system requirements and local codes.
OEM Manufacturing and Custom Supply
As a direct factory, we manufacture aluminum camlock couplings in all types (A, B, C, D, E, F, DP) with:
-
Sizes: 1/2" to 8" (custom sizes on request)
-
Threads: NPT or BSPT
-
Marking: Custom logo or part number
-
Packaging: Custom cartons and labels
-
Quality control: Dimensional inspection and pressure testing
We supply distributors, importers, and equipment manufacturers worldwide. Contact us with your type, size, and thread specification for pricing and lead time.
FAQ
Q: What is the difference between Type A and Type F?
A: Type A has a female threaded end; Type F has a male threaded end. Both have a male grooved adapter on the other end.
Q: Can I connect Type B to Type F?
A: Yes. Type B (female coupler) connects to Type F (male adapter) of the same size. This is a common pairing.
Q: What is a Type DP used for?
A: Type DP is a dust plug that protects the inside of a female coupler from dirt and debris when not in use.
Q: Are all camlock types available in aluminum?
A: Yes. We manufacture Types A, B, C, D, E, F, and DP in aluminum. Other materials are available on request.
Q: How do I know which type I need?
A: Identify the connection on each end (threaded, hose, or camlock) and the gender (male or female). Match that to the type table above, or contact us with your application details.
Q: Do you offer OEM marking and packaging?
A: Yes. Custom logo marking and packaging are available for OEM orders.
Request a Quote
Need aluminum camlock couplings in Type A, B, C, D, E, F, or DP?
Send us your type, size, thread standard (NPT/BSPT), and quantity. Our team will respond with pricing, lead time, and technical confirmation.
Contact us today for a factory quote.

